How Will You Increase The Range Of Host Router WiFi Signals

By doing the Brostrend WiFi extender setup you will easily extend the range of the router WiFi signals in five minutes. There are three methods to do the installation process of the Brostrend WiFi range extender. Before beginning the process, initially, you will need to do the login process for the Brostrend range extender.

How To Visit Brostrend Extender Web Management Page

First, grab a Wi-Fi-containing gadget and connect it to the Brostrend extender network with the help of an ethernet cable.
Now, you will need to open a web browser and enter the web portal re.brostrend.com in the HTML bar.
Next, write all the relevant login information to visit the login page.
In case you don’t know the credentials then check the tag or the bottom of your Brostrend extender device.

How To Configure Brostrend Extender?

There are three methods to do the configuration process of the Brostrend range extender

Method 1: By Web UI

To start with, turn on your Brostrend range extender device.
Now, place the power plug of the Brostrend extender in a wall socket.
Make sure, your extender must be located closer to the host router.
After that, connect your Wi-Fi-containing gadget to the brostrend range extender network.
Next, open the web browser and write re.brostrend.com web portal in the URL bar of the web browser.
Further, make a strong WiFi security password for lateral use.
Pick that WiFi network from the WiFi list which one you want to boost. Fill in the security password.
In the end, wait for a few minutes to see an extended successful message appear on your display.

Method 2: By WPS Button

Note: First make sure your existing router must support the WPS button. If it does not support this WPS button, then change your old router to a new router.

First, you will need to power on your Brostrend range extender.
Now, push the WPS button for two-three seconds for the brostrend extender and router.
Next, the solid blue LED starts flashing on both the extender and router gadget.
As a result, it means they both are successfully linked with each other.

Method 3: By An Access Point

Initially, connect your Brostrend range extender and router to each other with the help of an ethernet cable.
After that, open the web page and enter the re.brsotrend.com web portal in the URL field.
Now, from the menu select the mode option.
In the end, write the network name and security password.

After reading the above three methods, you will successfully do the Brostrend WiFi extender setup without facing any trouble.

Solve Brostrend Extender Issues

During the configuration process of the Brostrend WiFi range extender if you are facing an issue then you will need to follow the lower solution tips to fix them.

Check Brostrend Extender Placement:

Due to improper placement of the Brostrend extender, you can face trouble. We suggest you locate your Brostrend range extender in the central location of your house and office. The distance between the Brostrend extender and the host router should not be maximum. By doing this your Brostrend WiFi extender setup issue is fixed.

Verify All Cable Connections:

To eliminate the extender configuration issue, you will also need to verify all the cable connections. In case, if you see any damaged cable or wire then eliminate it.

Improve Brostrend Range Extender Firmware

To start with, launch the search engine on your computer or mobile phone and enter the web portal in the location field.
After doing this you will directly visit the settings page of the Brostrend range extender.
Now, pick the firmware upgrade option and then look for the software upgrade option.
Further, download the latest firmware file on your laptop or your computer.
As a result, after doing this you will successfully improve the latest version of the firmware.

Reset Brostrend Extender Device

Look for the reset hole button which is located at the back side of the extender device.
Now, push it with the help of a hairpin for 8 to 10 seconds.
After doing this all the Brostrend extender LEDs will turn off.
As a result, it means the brostrend extender device is now completely reset.

Note: After doing the reset method, you will need to do the Brostrend WiFi extender setup process again.

With the help of the page/article, now you will know how you can easily extend the range of the router WiFi signal by doing the Brostrend WiFi extender setup. In case, after trying the above solution tips if you are still facing issues with your Brostrend range extender device then do just one thing: try to ping our Brostrend service team. It will assist you to resolve the extender issue.